Split system with quick couplings — Daikin SP-O — SB.MSP212P3E

Made in Italy by Daikin (Zanotti) | Pre-charged quick couplings | Self-install, no F-gas

Complete split set — one purchase item, factory matched.

Split system with quick couplings

SP-O brings the same quick-coupling philosophy as the GS range with a floor- or roof-standing condensing unit: every refrigerant-carrying part arrives factory pre-charged and sealed. Mount, connect, run — without opening the circuit and without an F-gas engineer.

What makes it work

Factory pre-charged circuit. Self-sealing quick couplings close the circuit mechanically — refrigerant never touches site air.

Three line set lengths. 2.5 m (P1), 5 m (P2) or 10 m (P3) pre-charged line sets; the set code (2KTC…) is part of the product code.

Remote condensing unit. Floor or roof mounting — compressor noise and condenser heat stay out of the workspace.

Refrigerant: R-134a, factory sealed

This system runs on R-134a (GWP 1430), a proven refrigerant for commercial refrigeration with stable performance across the full operating envelope.

Both units and the connection lines are factory pre-charged and sealed: in normal installation the circuit is never opened, so no refrigerant handling and no F-gas certification are required on site.

Installation

Mount the evaporator inside and the condensing unit on a floor base or roof, route the pre-charged line set (max 10 m), tighten the couplings, power up. No brazing, vacuum or refrigerant handling on site.

Sizing guide — SP-O range

Manufacturer-recommended room volumes (35°C ambient, PIR insulation panels):

Each SP-O model is available with a 2.5 m (P1), 5 m (P2) or 10 m (P3) factory pre-charged line set — choose by the distance between the units.

What's included

• Condensing unit (factory pre-charged)
• Evaporator unit (factory pre-charged)
• Pre-charged quick-coupling line set (length per variant)
• 24-month warranty